PC-ABS

PC-ABS is one of the most widely used industrial thermoplastics. PC-ABS offers the most desirable properties of both materials – the superior strength and heat resistance of PC and the flexibility of ABS. PC-ABS blends are commonly used in automotive, electronics and telecommunications applications.

Color options: Black

PC-ABS

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 5,900 psi 41 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 278,000 psi 1,900 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 6% 6%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 9,800 psi 68 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 280,000 psi 1,900 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 3.7 ft-lb/in 196 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 9 ft-lb/in 481 J/m

 

Thermal Properties2 Test Method English Metric
Heat Deflection (HDT) @ 66 psi ASTM D648 230°F 110°C
Heat Deflection (HDT) @ 264 psi ASTM D648 205°F 96°C
Vicat Softening Temperature ASTM D1525 234°F 112°C
Glass Transition Temperature (Tg) DMA (SSYS) 257°F 125°C
Coefficient of Thermal Expansion - – - – - – - – - 4.10 E -05 in/in/°F - – - – -
Melt Point  - – - – - – - – - Not Applicable3 Not Applicable3

 

Electrical Properties4 Test Method Value Range
Volume Resistivity ASTM D257 2.0x10e14 – 4.4x10e13 ohms
Dielectric Constant ASTM D150-98 2.9 – 2.7
Dissipation Factor ASTM D150-98 .0035 – .0032
Dielectric Strength ASTM D149-09, Method A 340 – 90 V/mil

 

Other2 Test Method Value
Specific Gravity ASTM D792 1.10
Density ASTM D792 0.0397 lb/in3
Flame Classification UL94 HB
Rockwell Hardness ASTM D785 R110
UL File Number —————- E345258

 

1Build orientation is on side long edge.
2Literature value unless otherwise noted.
3Due to amorphous nature, material does not display a melting point.
4All Electrical Property values were generated from the average of test plaques built with default part density (solid). Test plaques were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation.
50.005 inch (0.127 mm) layer thickness not available for Fortus 900mc