Materials - TangoGray PolyJet Resin (FC-950)

PolyJet is a resin like material. This material works well for models that require smoother surface finish and high feature detail. Our Tango PolyJet Resins are similar to rubber or silicone. Parts from this material can easily stretch to mate with other components. TangoGray (FC950) provides controlled flexibility and elasticity with a hardness of 75 Shore A. Tango is expected to be of interest to manufacturers of products with pliable features, such as tires, toys, shoes, gaskets, keypads, over-molding, and flexible automobile trim components.

Available Colors

TangoGray PolyJet Resin (FC950)

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy
PolyJet Resin: Layer Thickness - Horizontal build layers down to 16 microns (0.0006 inches).

Build Resolution - X axis: 600 dpi. Y axis: 300 dpi. Z axis: 1600 dpi.

Part Accuracy: (Note, Objet does not provide part accuracy data only build resolution, so the accuracies defined below are based on our best judgment)

± 0.005 < 4 inches is typical
± 0.008 is generally the worse case but it is geometry dependant

Maximum Build Dimensions*

• 19.7x 15.7 x 4 (inch)

• 500x 400x 100(mm)

*Larger parts can be built in pieces and bonded if necessary