Rapid Prototyping Materials - Clear Polyjet Resin (FC-720)

PolyJet is a resin like material similar to stereolithography (SLA). Clear PolyJet Resin (FC720) works well for prototypes that require smooth surface finish and high feature detail. Parts from this material can absorb paint or dye, be chrome plated, used as a master for silicone molds and have been used in investment casting. Clear PolyJet parts will have a semi-translucent appearance, which can be enhanced with sanding and buffing. Typical industries included toys, foot wear, architecture and any industry where feature detail and surface finish are required.

Available Colors

 
Clear PolyJet Resin (FC720)

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy
PolyJet Resin: Layer Thickness - Horizontal build layers down to 16 microns (0.0006 inches).

Build Resolution - X axis: 600 dpi. Y axis: 300 dpi. Z axis: 1600 dpi.

Part Accuracy: (Note, Objet does not provide part accuracy data only build resolution, so the accuracies defined below are based on our best judgment)

± 0.005 < 4 inches is typical
± 0.008 is generally the worse case but it is geometry dependant

Maximum Build Dimensions*

• 19.7x 15.7 x 7.9 (inch)

• 500x 400x 200 (mm)

*Larger parts can be built in pieces and bonded if necessary